Original Article | 2006, Vol.28, No.4, pp. 817-828
Flux, rejection and fouling during microfiltration and ultrafiltration of sugar palm sap using a pilot plant scale
Tapanee Ritthipairote, Wirote Youravong and Pikul Wanichapichart
pp. 817 - 828
Abstract
The possibility of using a pilot plant scale microfiltration (MF) and ultrafiltration (UF) to clarify and reduce number of bacteria, yeast and mould of sugar palm sap was studied. The membrane used was multi channel tubular ceramic membrane (ZrO2-TiO2) with membrane pore size 0.2 and 0.1 µm and molecular weight cut off (MWCO) 300 and 50 kDa for microfiltration and ultrafiltration respectively. The experiment was carried out to investigate the rejection of the components in sugar palm sap, permeate flux and fouling characteristics. The results showed that the turbidity, the total solid, the viscosity and the numbers of bacteria, yeast and mould in the permeate obtained by MF and UF were reduced significantly compared to those of fresh sugar palm sap. The total soluble solid, total sugar, reducing sugar and pH were not affected by MF and UF. The permeate fluxes for all membranes were reduced greatly as the volume concentration ratio (VCR) increased due to severe fouling. The irreversible fouling on membrane surface and/or inside the membrane tended to increase with increasing membrane pore size or MWCO. The result also suggested that protein and small particle in the sugar palm sap were probably responsible for the internal fouling of large pore size membrane. According to the physical, chemical and microorganism quality results, both MF and UF showed the potential use for improving the quality of sugar palm sap but flux reduction due to fouling was a major problem affecting the process performance.
